Client: Balmer Lawrie (UAE) L.L.C
Consultant: Capital Engineering Consultancy
Contractor: Creative Infinity Interior Decoration LLC
Brand: KLIQ
The project required knurled pull handles in different lengths and finishes. At Aurra we specialise in manufacturing custom made sizs and finishes.
Client: AL Habbai Contracting LLC
Consultant: Style Consulting Engineers
Contractor: AL Habbai Contracting LLC
Brand: AJAR
This handle is made of Zinc alloy and it was a challenge to achieve the specific champagne finish as requested by the cleint
Client: Apple
Consultant: MCM.
Contractor: Bowyer Wick Building Contracting LLC
Brand: CISA
The cylinders for a prestigious office project had to be masterkeyed, powder coated to a specific powder supplied with keys engraved and engraving on the cylinder. The cylinder keys and the master keys supplied were to be not duplicable. Right from the creating of the master key schedule to supplying the cylinders to site the time taken was just five weeks.
Client: Gattopardo & Bar Des Pres ICD Brookfield Dubai
Consultant: Lazaro Rosa-Violan
Contractor: Bowyer Wick Building Contracting LLC
Brand: Formani
Brand: Customized by Aurra
This project had multiple finishes, automatic doors sliding and swing door different types of handle some standard and others custom made. Colating all the information producing as per requiremens procuring from different sources and finishing as per client color scheme was achieved on this project which had very tight delivery deadlines
Client: Caprice SF Restaurant and Bar LTD
Consultant: OIR
Contractor: Bowyer Wick Building Contracting LLC
Metal Door Installation
This project had metal doors but the installation could be done only after 11 PM and before 6AM With the cooperation of the door manufacturere we were able to conform to the installation timings.
Contractor: DNL DESIGN LLC
Brand: EBCO
This sliding folding door mechanisim was required for six and eight panels. The materials were to be imported but due to lack of time the materials had to be sourced from what was avialble in the local market and was done sucessfully.
Client: KOA Real Estate Development
Consultant: EMKAAN Architecture & Engineering Consultancy
Contractor: ECC Fit Out Construction LLC
Timber Door Installation with Cladding
this project was a challenge because of the timellines and a cladding required on the wooden door which was natural brass and to naturally age. The size of the door 3400mm high and 2000mm wide. The cladding was to be on both sides of the door and the handle was to be in brass integtaed within the brass cladding
Contractor: Elite Overseas Building LLC
Brand: AJAR
Another projected executed within strict deadlines where the developer came to us because of timelines and qualtiy experience of other suppliers in the market
Client: RAK Properties PJSC
Consultant: IRD Design
Contractor: HTS Interior Design LLC
Brand: KLIQ
This Pull handle is unique as it integrates a cylinder hole within the handle itself. Simple and beautiful solution yet different in look and feel.
Client: Mr. Axel Goetz
Consultant: MILO Interiors LLC
Contractor: MILO Interiors LLC
Brand: Olivari
This handle comes in specific finishes and cannot be electroplated as the construction of the handle by the manufacturer is such that it is not possible to dismantle and re assemble the handle after electroplating locally. We therefore had to plate all the balance items on the project based on the factory finish of the lever handle Please note that there is no rose for the lever handle.
Client: Mikhail Kapustin
Consultant: MILO Interiors LLC
Contractor: MILO Interiors LLC
Brand: Olivari
This handle comes in specific finishes and cannot be electroplated as the construction of the handle by the manufacturer is such that it is not possible to dismantle and re assemble the handle after electroplating locally. We therefore had to plate all the balance items on the project based on the factory finish of the lever handle Please note that the rose is slim and 4mm thick
Client: Mr. Richard El Hajj
Contractor: Mr. Richard El Hajj
Brand: Olivari
This handle comes in specific finishes and cannot be electroplated as the construction of the handle by the manufacturer is such that it is not possible to dismantle and re assemble the handle after electroplating locally. We therefore had to plate all the balance items on the project based on the factory finish of the lever handle Please note that there is no rose for the lever handle.
Consultant: MB Architects
Contractor: Olsen & Partners Interiors LLC
Brand: CASSON
Brand: Halliday Baillie
We were asked to provide a flush effect pull on pocket sliding door Found two excellent solutions one to be fixed on the edge of the pocket and one on the face of the door. A different solution to what is available standard in the market.
Contractor: PLUSH TAN L.L.C
Brand: Customized by Aurra
A client requested for customised numbering for the doors in their salon The number sample that was provided did not relate to any standard font. We worked to a closest font and got the approval to proceed and finsh the numbering 35 of them in a champagne finish.
Client: Mr. Anand Kumar
Consultant: MWM Studio
Contractor: Sun Wood Technical Work LLC
Brand: AJAR
This is a handle which is a lot of consultants favorite. We get specified with this handle on quite a few projects.
Client: Hilton Double Tree
Consultant: Zebra Projects FZE
Contractor: The Technical Systems For Trading & Contracting
Brand: Customized by Aurra
This is a handle which is a lot of consultants favorite. We get specified with this handle on quite a few projects.
Client: HH Ali Soori
Contractor: Vision Wooden Decorative Products Manufacturing LLC
Unique flush pull with escutcheon for a door to be fixed horizontally Normally on swing doors the general preference of architects is to go with flush pulls that are vertically fixed similar to the flush pulls for sliding door. This is different and unique for this project
Client: Sohaila Afzal Majid Mohamed
Consultant: EVA Interiors | XBD Architecture
Contractor: Visiontech ideal LLC
Brand: Moshneb
A copper handle with an unique fluted shape and square roses developed by Moshneb from Egypt. Hand crafted and casted metal design.